5 3M N95 masks GIVEAWAY for Q VIPs. Apply >
The item may not ship to your country. Contact seller and request shipping to your location.
Available Shipping Methods:
Please note: Standard and expedited shipping costs are only estimates; the actual cost will be shown on the Order Page.
US$2.93 - US$3.14
5 pcs (MOQ)
Additives: Blue Color and Secret High Lubricity Additive Mixture
Best For Chunky Filaments: YES
Best For Flexible Filaments: YES
Color: Dark Blue
Inner Diameter (mm): 1.90 +/- 0.05
Outer Diameter (mm): 3.95 +/- 0.05
Material: Highest Quality Pure Virgin PTFE
Melting Point: up to 340° C
Upgraded Creality All Metal MK-8 Extruder
Material: Aluminum Alloy
Drive Gear:40 Teeth
1*Upgraded Creality All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/3 X/3V2/Pro x, Ender 5/5 Plus/5 Pro, CR-10 Series, CR-10S, CR-10 Plus, CR 20/20 Pro, CR-X.It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend.
4* bed-level springs for stiff and accurate bed leveling. NOTE: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You may use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.
1 x 1M Capricorn Premium XS bowden Tubing
1 x Gray MK8 extruder drive feed kit
4 x Bed-level springs
1 pair- small and large pneumatic couplers
The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You may use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the
Tips for tubing installation: please intall the fitting Pneumatic fitting on the extruder first, then insert the tubing and push it in until it couldn't be pushed, then install the littble blue clip.
Find answers in product info, Q&As
Please make sure that you are posting in the form of a question.
Your question has been submitted successfully !
Thank you for subscribing!
The discount code has been sent to your mailbox.
Please check it carefully.
Copyright ©2014-2022 Tinkleo.com All Rights Reserved.