Foldable Home Bathtub Portable Thickened Body Bath Barrel with Good Insulation Performance and No Require of Inflate

Overview

This high quality bathtub is made of premium planting fabric and PVC, which are environmental friendly and durable. It is so convenient to use with the folding design, three-layer for better insulation performance and intimate water discharge design. A pretty good home bathtub for you and your families.

Features

* Select new thickening material, which with high firmness, good toughness, high temperature resistance, and not easy to break, rest assured to use.

* The bathtub is easy to carry around and store with the detachable design, which makes it space-saving and more convenient to use.

* It is composed of three layers of material. The outer layer is a high-density planting linen material, which can effectively resist the cold. The middle is thickened quilted to enhance the insulation effect. The lining is a PVC water-proof layer, which locks the internal heat to increase the insulation duration.

* The bathtub itself does not need to be inflated. You only need to support the bracket and connect it with the connecting piece to open the bathtub. More simple and convenient to use.

* The water discharge design of the side and bottom of the bathtub allows you to open the bottom drainage opening to discharge the remaining water when there is little water left at the bottom of the bathtub.

Product Specification

Product name: Foldable Bathtub

Material: High-density flannelette/pearl cotton/PVC

Size: 25.59*27.56 inch

Capacity: 248L

Weight: 3000g

One-off bath tote bag material: DOPE

One-off bath tote bag weight: 450g(25pcs)

One-off bath tote bag length: 47.24 inch

One-off bath tote bag width: 51.18 inch

One-off bath tote bag circumference: 102.36 inch

Installation

1.Insert the 6 brackets into corresponding holes

2.Erect the bathtub

3.Insert the black plastic protection head into each end of the black elastic strip

4.Insert 3 elastic strips into the edge and connect them end to end with connecting components

5.There are three metal link tubes, one of them with indentation, which is the first one you should install, and the last one you should remove.

6.Take a bath after installation

Notice

1. For the first time, please wash the tub thoroughly with warm water and a soft cloth. Do not use wash it with hot water which is of high temperature above 60 ℃ to avoid damage to the PVC layer;

2. When filling the tub with water, please fill it with cold water and then hot water, or directly use warm water at about 45 ℃; do not stick the faucet directly on the top of the tub to avoid bulging the product;

3. The water level of the bath should not exceed the chest (preferably at the water level of 1/2 to 2/3 height), the water temperature should be 38-42℃, and the bath time should not exceed 30 minutes;

4. After bathing, please discharge the water completely. Please do not store the water for a long time, which may cause the deformation of the bathtub;

5. Do not store it in direct sunlight or near flammable materials;

6. Adults are required to take care of the elderly, patients and children when they use it for bathing.

Maintenance

1. It is recommended to wipe with a soft cloth and do not use bleach to wash it or soak it for a long time;

2. When drying, avoid direct sunlight to avoid discoloration and damage to insulation performance.