cn-099
Available Shipping Methods:
Please note: Standard and expedited shipping costs are only estimates; the actual cost will be shown on the Order Page.
Overview
This buckle belt, built for preventing pants from slipping or decorating clothes, is made of high-quality first leather layer, which is soft, smooth and washable. Alloy clasp and paint edge designs are adopted to provide convenient and best-in-class using experiences for you.
Features
* This belt is made of superior first top layer leather, which is soft, smooth, tough and not easy to peel after long time of use.
* Solid alloy clasp is adopted, which is abrasion resistant and rust-proof and adds the finishing touch for the waistband.
* The belt has been treated with delicate paint edge process, which makes the edge of the belt not easy to crack.
* Exquisite stitching makes the edge of the waist band firmer and makes the belt have good sense of line.
Product Specification
Product Name: mens leather buckle belts
Material: top layer leather
Size: length: 43.31-47.24 inch, width: 1.50 inch
Color: black, brown, dark brown
Buckle: alloy
Installation
1.Use a screwdriver to remove the screws on the back of the buckle.
2.Measure your waistline and cut off the excess part of the belt.
3.Make a mark through the cut hole of the cut belt, and then punch the mark part with the puncher.
4.Screw on the screw and then finish.
Notice
1. When punching, please put a piece of wood under the belt (do not operate directly on the floor or table, so as not to hurt the floor and table), stand the punch on the belt 90 degrees vertically downward, and knock with a hammer until the belt is punched with a small hole.
2. Please allow slight measure differ due to manual measurement, thanks!
Rita Mick
Please make sure that you are posting in the form of a question.
*Questions:0/2000
Your question has been submitted successfully !
Thank you for subscribing!
The discount code has been sent to your mailbox.
Please check it carefully.
Copyright ©2014-2020 Tinkleo.com All Rights Reserved.
