Selling 10 more units will appear 1 free order, or you could just buy 10 units and get 1 unit free
5 3M N95 masks GIVEAWAY for Q VIPs. Apply >
The item may not ship to your country. Contact seller and request shipping to your location.
Available Shipping Methods:
Please note: Standard and expedited shipping costs are only estimates; the actual cost will be shown on the Order Page.
US$2.4 - US$2.6
10 PCS (MOQ)
US$2.4 - US$2.7
10 PCS (MOQ)
HD-90 °C moisture absorption card, it adopts dual chip and dehumidification regeneration is faster, Once by plugging can restore dryness, it is a energy saving and environmental protection, it can effective dehumidificate, it adopts ptc ceramic heating device and electronic regenerative moisture absorption card, it has functions of moisture absorption and regeneration
* Once by plugging can restore dryness, it is a energy saving and environmental protection, it can effective dehumidificate
* It adopts ptc ceramic heating device and electronic regenerative moisture absorption card, it has functions of moisture absorption and regeneration
* Moisture absorption without plug-in and heat effect, it adopts light and thin design, can free moisture absorb, it is safe and save power, it has long service life
* The operation is simple and the window is displayed by the moisture absorbing beads, blue indicates the feeling after power-on and red indicates wet before power-on
* HD-90 °C moisture absorption card, it adopts dual chip and dehumidification regeneration is faster
Product: Electronic moisture absorber
Model: HC-65C, HD-80C, HD-90C
Size: 13.8x9.8x3.3cm, 12x12x2.9cm, 18x10.2x3.5cm
Charge: Self-contained plug, independent charging cable
Power: 16W, 7W, 15W
Weight: 0.32, 0.2, 0.34kg
First, put it into the moisture-proof box (cabinet) before use, first power-on regeneration, the method is as follows:
A: Connect the power cord and connect the power (AC220V) indicator.
B: Power on for about 3-5 hours. Use the moisture absorption card to fully regenerate and dry (the indicator window beads are blue)
C: Unplug the power and retract the plug to allow the moisture card to stand for 20-30 minutes to cool it.
D: Put the moisture absorption card into the moisture-proof box to absorb moisture
2. Put the regenerated moisture card into the moisture-proof box to absorb moisture.
Third, the regeneration cycle:
If there is a humidity indicator in the container or cabinet, observe the hygrometer indication, >60%RH. Please take out the moisture absorption card from the moisture-proof box. After power-on, repeat the regeneration. If the humidity meter of the moisture-proof box is <25%-50%RH, No need to take out the regeneration, no humidity indicator, observe the change of the color of the blue glue in the indicator window on the moisture absorption card, and change the color from dark blue to pink
1. For the first time, if the indicator window on the moisture absorption card is blue-violet, it can be used directly.
2. The moisture absorption card should be used in the moisture-proof box and outside the cabinet, placed vertically on a well-ventilated table (table) or on the ground.
3. When the moisture absorption card is placed in the moisture-proof box to absorb moisture, it must not be energized
Find answers in product info, Q&As
Please make sure that you are posting in the form of a question.
Your question has been submitted successfully !
Thank you for subscribing!
The discount code has been sent to your mailbox.
Please check it carefully.
Copyright ©2014-2021 深圳市蜘蛛百讯科技有限公司 All Rights Reserved.