Wholesale KJHFHYP Disposable Nitrile Gloves Bule Reinforced Laboratory Protective Gloves Anti-static Nitrile Gloves

Product Description

PVC glove material composition, it is made of high-grade PVC material disposable gloves, micro powder, is an economic choice in the case of frequent replacement of gloves. The product is only suitable for basic chemicals and splash proof applications. Seamless, waterproof performance is good, regardless of left and right hand.

It is suitable for hairdressing, fine installation, product inspection, jewelry polishing, paint, ink and dye treatment, glassware, porcelain or precision metal, painting, coating and cleaning, glue and adhesive treatment, equipment cleaning, fine installation, etc. PVC gloves are disposable gloves made of high-grade powder free PVC materials, which are not easy to cause pollution caused by powder. The product is not designed by hand, only suitable for basic chemicals and splash proof applications, suitable for food processing, public catering industry, food service industry. Natural rubber gloves are not divided into left and right hand design, powder free design, 33-600 Moisturizing Series contains glycerin, which can protect hand skin and reduce skin allergy caused by natural rubber. This range of products is only suitable for basic chemicals and splash proof applications. It is suitable for food processing and processing, deli, public catering and food service industries.

The production of PVC gloves first mixed the main raw materials and auxiliaries in a special container in a certain proportion and mixed them into emulsion. After filtration, vacuum pumping and static setting, the mixture was sent into the dip tank of the production line by the pump. Under normal production conditions, the hand mould on the pipeline automatically enters the impregnation tank, and the hand mould adhered to the emulsion comes out of the dipping slot in turn, and keeps rotating in the process, so that the emulsion on the surface of the hand mould is uniform, and the excess emulsion drops down. The dripping liquid returns to the soaking tank through the collecting tank. The hand mould after dropping the excess emulsion enters the oven with the production line, and the oven temperature is controlled at 230-250 degrees Celsius. Under these conditions, the emulsion on hand feels ripe. After natural cooling, lip curling, powder staining and other processes, the gloves are manually removed from the hand mold, and the hand mold continuously moves toward the immersion tank. After the powder removal, the PVC gloves will be put into storage.

Precautions for use of PVC gloves: disposable PVC gloves do not have high temperature resistance and insulation properties. It is not allowed to be used in high-temperature workplace, and it is absolutely not allowed to be used as insulating gloves. Once the disposable PVC gloves are cut, the protective effect will be affected. Do not use it. The disposable PVC gloves should be kept ventilated and dry during storage to prevent moisture and mildew. When using disposable PVC gloves. Contact with lame substances is prohibited.

Instructions
This product is not divided into left and right hands, please choose the gloves suitable for your hand type;
When wearing gloves, do not wear rings or other accessories, pay attention to trim nails;
This product is limited to one-time use; the product after use should be treated as medical waste to prevent bacteria from polluting the environment;
Direct sunlight or ultraviolet rays are strictly prohibited.
Storage conditions and methods of disposable PVC gloves
It should be stored in a cool and dry warehouse (indoor temperature below 30 ℃, relative humidity below 80%) on the shelf 200 mm above the ground