Selling 10 more units will appear 1 free order, or you could just buy 10 units and get 1 unit free
5 3M N95 masks GIVEAWAY for Q VIPs. Apply >
$200-$10
$100-20
Available Shipping Methods:
Please note: Standard and expedited shipping costs are only estimates; the actual cost will be shown on the Order Page.
Product Specification
Product name: 59S SZH8-S2 LED ultraviolet disinfection box
Product model: SZH8-S2 type
DC input: 10V=700mA (powered by an external dedicated adapter)
Number of LEDs: 8
Product weight: 600g
Product size: 216×105×70mm
Outer box size: 470*240*348mm
Body weight: 420g
Wavelength: 260-280nm
Input interface: USB interface (Type-C)
Packing quantity: 16 sets/piece
Adapter parameters: rated input: 100-240ac 50/60Hz 0.15A
Rated output: 10V=700mA
Life of UV lamp beads: 10,000 hours
Instructions for use
⒈Preparation before disinfection
Place the sterilizer on a flat table, connect the USB cable, and place an object of appropriate size in the sterilizer.
⒉Turn on and off
Long press function (about 3 seconds) to turn on. All the white lights are on, flashing once, and then the white lights are on for a long time. Press and hold the function key (about 3 seconds) to turn off the phone in any state of power on.
⒊Disinfection
Disinfection (with voice function): Short press the function button (about 0.3 seconds) in the standby state, voice prompt: start disinfection, turn on the 59-second timer disinfection function, indicator ring installation instructions; after completion, enter the standby, voice prompt: disinfection completed. After the disinfection is completed, the white light will stay on. After one round of disinfection is over, turn the object over, let the ultraviolet rays irradiate the other side, and repeat the disinfection steps to ensure that all surfaces are disinfected in place.
⒋Indicator
⑴Power-on instruction: all white lights are on, flashing once
⑵Standby indication: the white light is always on
⑶ Disinfection instructions: white light ring mounted display
⒌Automatic shutdown
The product has its own power-saving and energy-saving monitoring function, and it will automatically shut down after 15 hours of standby.
⒍Open lid induction
The product has a built-in gravity sensor switch, and the sterilization LED will automatically turn off when the upper cover is opened when it is disinfected; please do not place the product in a magnetic field, otherwise the cover-opening sensor function may fail.
Please make sure that you are posting in the form of a question.
*Questions:0/2000
Your question has been submitted successfully !
Thank you for subscribing!
The discount code has been sent to your mailbox.
Please check it carefully.
Copyright ©2014-2023 Tinkleo.com All Rights Reserved.