Selling 1 more units will appear 1 free order, or you could just buy 10 units and get 1 unit free
cn-099
Available Shipping Methods:
Please note: Standard and expedited shipping costs are only estimates; the actual cost will be shown on the Order Page.
1 unit(s) for free after 1 more unit(s) sold
Free order#tk452449de4603fcdc8 free order successfully, Dow Jones Index(2021-03-15) 32953
Free order#tk35738ebec86033f771 free order successfully, Dow Jones Index(2021-03-01) 31535
Free order#tk218333ff8860195381 free order successfully, Dow Jones Index(2021-02-18) 31493
Free order#tk8493e0bc3c600e2eed free order successfully, Dow Jones Index(2021-02-02) 30687
Free order#tk72245c039c6004e8e8 free order successfully, Dow Jones Index(2021-01-27) 30303
Material:Non-woven fabric
Color:White
Condition: A brand-new, unused, unopened
Model:3M 9501+
MPN:3M-9501+
Country/Region of Manufacture:China
Brand:3M
Filter Class:KN95
Package Include:50 x 3M 9501+ Respirators
Applications: Protection from particulate matter, haze, PM2.5, microorganism, dust, pollen
Packing: environmental protection bag
Use For
Particles such as those from grinding, sanding, sweeping, sawing, bagging or processing minerals,
silica, coal, iron ore, heavy metal, flour, wood, pollen and certain other substances. Liquid or non-oil
based particles from sprays that do not also emit oil aerosols or vapors. Metal fumes produced from
welding, brazing, cutting and other operations involving heating of metals.
Do Not Use For
Do not use for gases and vapors, oil aerosols, or sandblasting; particulate concentrations that exceed
either 10 times the occupational exposure limit or applicable government regulations, whichever is
lower. This respirator does not supply oxygen. Do not use in atmospheres containing less than 19.5%
oxygen.
Fitting Instructions
Must be followed each time respirator is worn.
1. With nosepiece facing away from you, hold the earloop strap in each hand with the nosepiece up.
2. Position the respirator under the chin.
3. Pull each strap over the ear. Adjust the straps as comfortable as possible.
4. Place the fingertips of both hands at the top of the metal nosepiece. Mold the nosepiece to the shape
of the nose bridge by pushing inwards while moving your fingertips down both sides of the nosepiece.
Pinching the respirator nosepiece using only one hand may result in less effective respirator fit.
5. The seal of the respirator on the face should be checked by the wearer prior to entering the work
area.
a) Cover the front of the respirator with both hands, being careful not to disturb the position of the
respirator.
b) Exhale sharply. If air leaks around the nose bridge, readjust the nosepiece as described in step 4. If
air leaks at the respirator edges, work the straps back along the side of your hand. If you CANNOT
achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.
c) If no leakage is detected, then work may proceed.
blabla******@hotmail.com
Nov 03, 2020
c.fc.fc.******@gmail.com
stestestephen.******@hotmail.com
Oct 05, 2020
Leeyah Nguyen
K Hitchner
Liberty Scaffolding
Darren Olson
djemeck took
charles mwangi
Cheryl Waugh
Liezl Montilla
Shana S
olfolf******@gmail.com
Aug 22, 2020
blabla******@hotmail.com
Aug 21, 2020
carcarcaron.******@gmail.com
Aug 18, 2020
Lexxie Davison
janet taylor
Impakt Inbound Marketing
Touch v
Buddy Nuzzi
Please make sure that you are posting in the form of a question.
*Questions:0/2000
Your question has been submitted successfully !
Thank you for subscribing!
The discount code has been sent to your mailbox.
Please check it carefully.
Copyright ©2014-2024 Tinkleo.com All Rights Reserved.
